Customizing Your Monitor
Setting the power saving delay time
You can set the delay time before the monitor enters the power saving mode. See page 19 for more information on this monitor’s power saving capabilities.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
OPTION,” and press the MENU button again.
The OPTION OSD appears.
OPTION
| ON |
ZZ... | 1 MIN |
| |
| UNLOCK |
MANUAL DEGAUSS
3Press the ¬./>buttons to select “ 
ZZ... (PWR SAVE
DELAY).”
OPTION
AUTO
5 SEC 
1 MIN
ZZ... 60 MIN OFF
PWR SAVE DELAY
4Press the >?//buttons to select the desired time.
When PWR SAVE DELAY is set to “OFF,” the monitor does not go into power saving mode.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
Locking the controls
The control lock function disables all of the buttons on the front panel except the u(power) switch, MENU and INPUT buttons.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
OPTION,” and press the MENU button again.
The OPTION OSD appears.
OPTION
| ON |
ZZ... | 1 MIN |
| |
| UNLOCK |
MANUAL DEGAUSS
3Press the ¬./>buttons to select “
(CONTROL
LOCK).”
OPTION
AUTO
ZZ...
UNLOCK LOCK
CONTROL LOCK
4Press the >?//buttons to select “LOCK.”
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
Once you select “LOCK,” you cannot select any items except “EXIT” and “ 
OPTION” in the MENU OSD. If you press any button other than the u(power) switch,
MENU and INPUT buttons, the 
mark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the >?// buttons to select “UNLOCK.”
16