Sony CPD-520GST9 Using the SCREEN On-screen, Display

4Fine tuning the color temperature

Press the ¬./>buttons to select R (red), G (green), or B (blue) and adjust by pressing the >?//buttons.

COLOR

1 6500K 9300K

R 76

G 50

B 50

The “5000K,” “6500K” or “9300K” disappears and the new color settings are memorized for each of the three color modes.

The color temperature modes change as follows: 5000Kn1, 6500Kn2, 9300Kn3

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

To reset, press the RESET button while the OSD is on. The selected item is reset to the factory settings.

Customizing Your Monitor

Using the SCREEN On-screen

Display

You can adjust convergence settings to eliminate red or blue shadows that may appear around objects on the screen. Adjust the CANCEL MOIRE function to eliminate wavy or elliptical patterns that may appear on the screen.

Adjust the LANDING function to correct color imbalances at the four corners of the screen due to influence from the earth’s magnetism.

Once CANCEL MOIRE is adjusted, it will be stored in memory for the current input signal. All other adjustments will be stored in memory for all input signals received.

1Press the MENU button.

The MENU OSD appears.

MENU

2 Press the ¬./>and >?//buttons to select “
		GB
SCREEN,” and press the MENU button again.
The SCREEN OSD appears.
	SCREEN

TOP

BOT

26

ADJ

H CONVERGENCE

3Press the ¬./>buttons to select the item you want to adjust.

Select		To
		adjust the horizontal convergence
H CONVERGENCE
		adjust the vertical convergence
V CONVERGENCE
	TOP	adjust the screen’s upper vertical
V CONVER TOP		convergence
	BOT	adjust the screen’s lower vertical
V CONVER BOTTOM		convergence

(continued)

13