Step 2: Connect the power cord

With the monitor switched off, connect one end of the power cord to the monitor and the other end to a power outlet.

to a power outlet to AC IN

￿

Power cord (supplied)

Step 3: Turn on the monitor and computer

The installation of your monitor is complete.

Note

If “OUT OF SCAN RANGE” or “NO INPUT SIGNAL” appears on the screen, see “Warning Messages” on page 20.

For customers using Windows 95/98

To maximize the potential of your monitor, install the new model information file from the supplied Windows Monitor Information Disk onto your PC.

This monitor complies with the “VESA DDC” Plug & Play standard. If your PC/graphics board complies with DDC, select “Plug & Play Monitor (VESA DDC)” or this monitor’s model name as the monitor type in the “Control Panel” of Windows 95/98. If your PC/graphics board has difficulty communicating with this monitor, load the Windows Monitor Information Disk and select this monitor’s model name as the monitor type.

For customers using Windows NT4.0

Monitor setup in Windows NT4.0 is different from Windows 95/98 and does not involve the selection of monitor type. Refer to the Windows NT4.0 instruction manual for further details on adjusting the resolution, refresh rate, and number of colors.

Getting Started

Automatically Adjusting the Size and Centering of the Picture

By pressing the auto sizing and centering (ASC) button, the size and centering of the picture are automatically adjusted to fit the screen.

1Turn on the monitor and computer.

2Press the ASC button.

The picture is adjusted to fit the center of the screen.

ASC

Notes

 

 

 

GB

• This function is intended for use with a computer running

 

 

 

Windows or similar graphic user interface software that

 

provides a full-screen picture. It may not work properly if the

 

background color is dark or if the input picture does not fill the

 

screen to the edges (such as an MS-DOS prompt).

 

•The screen may go blank for a few seconds while performing the auto-sizing function. This is not a malfunction.

•Although the signals for picture aspect ratio 5:4 (resolution: 1280 ⋅ 1024) do not fill the screen to the edges, the picture is

accurately displayed.

Selecting the On-screen Display Language

If you need to change the OSD language, see “Using the LANG (Language) On-screen Display” on page 17.

The default setting is English.

7