Setup

Before using your monitor, check that the following accessories are included in your carton:

•Power cord

•Current G3 adapter (for beige system) (1)

•Setup Disk (1)

•Warranty card

•Notes on cleaning the screen’s surface

•This instruction manual

Step 1:Connect your monitor to your computer

Turn off the monitor and computer before connecting.

Note

Do not touch the pins of the video signal cable connector as this might bend the pins.

xConnecting to an IBM PC/AT or compatible computer

(HD15)

1

AC IN

to video output

IBM PC/AT or compatible computer

xConnecting to a Macintosh or compatible computer

(HD15)

1

AC IN

Current G3 adapter (for beige system) (supplied)*

Macintosh or

to video

compatible computer

output

*Connect the supplied Macintosh adapter to the computer before connecting the cable.

This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh, and Power Macintosh G3 series computers that have two rows of pins. If you are connecting to the other version of Power Macintosh G3 series with three rows of pins or models other than those stated above, you will need a different adapter (not supplied).

6