Adjusting the brightness and contrast

Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu.

These settings are stored in memory for all input signals.1Move the control button in any direction.The BRIGHTNESS/CONTRAST menu appears on the screen.

BR I GHTNESS / CONTRAS T

3 1

8 5

2Move the control button m/M to adjust the brightness (), and </, to adjust the contrast (6).

The menu automatically disappears after about 3 seconds.

If you set sRGB to “ON” on the color setting, the brightness () and contrast (6) are automatically set to “31” and “85” respectively.

For more information about sRGB, see “Adjusting the color of the picture (COLOR)” on page 11.

Adjusting the centering of the picture (CENTER)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.3First move the control button m/M to select for

horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the centering.

Adjusting the size of the picture (SIZE)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight SIZE and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select for

horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the size.

Enlarging or reducing the picture (ZOOM)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight SIZE or CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3Move the control button m/M to select (zoom), and move </, to enlarge or reduce the picture.

Notes

•Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.

•The horizontal adjustment value is not displayed in the menu.

10