Setup

Before using your monitor, check that the following accessories are included in your carton:

•Power cord (1)•G3 adapter (for Macintosh blue and white system) (1)•Setup Disk (1)•Warranty card (1)•Notes on cleaning the screen’s surface (1)•This instruction manual (1)

Step 1: Connect your monitor to your computer

Turn off the monitor and computer before connecting.Note

Do not touch the pins of the video signal cable connector as this might bend the pins.

xConnecting to an IBM PC/AT or compatible computer

(HD15)

1

AC IN

to video output

IBM PC/AT or compatible computer

xConnecting to a Macintosh or compatible computer

Use the supplied G3 adapter (for blue and white system).

(HD15)

1

AC IN

G3 adapter (for blue and white system) (supplied)*

to video output

Power Macintosh G3

*Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with the Power Macintosh G3 computer that has three rows of pins. If you are connecting to the other version of Macintosh G3 series computer with two rows of pins or other models, you will need a different adapter (not supplied).

6