sRGB mode

The sRGB color setting is an industry standard color space protocol designed to correlate the displayed and printed colors of sRGB compliant computer products. To adjust the colors to the sRGB profile, simply select the sRGB mode in the COLOR menu. However, in order to display the sRGB colors correctly (γ =2.2, 6500K), you must set your computer to the sRGB profile and adjust the brightness ( ) and contrast (6) to the numbers shown in the menu. For information on how to change the brightness

( ) and contrast (6), see page 9.

Note

Your computer and other connected products (such as a printer), must be sRGB compliant.

COLOR

 

 

 

 

 

 

EASY

E PERT

 

s RGB

 

 

 

 

 

 

 

: 5 6

: 7 6 FOR

s RGB

 

 

 

 

 

 

 

Additional settings (OPTION)

You can manually degauss (demagnetize) the monitor, change the menu position, and lock the controls.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight OPTION and press the center of the control button again.

The OPTION menu appears on the screen.3Move the control button m/M to select the desired adjustment item.Adjust the selected item according to the following instructions.Degaussing the screen

The monitor is automatically demagnetized (degaussed) when the power is turned on.

To manually degauss the monitor, first move the control button m/Mto select (DEGAUSS). Then move the control button ,.

The screen is degaussed for about 2 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.

US

Changing the menu’s positionChange the menu’s position if it is blocking an image on the screen.To change the menu’s on-screen position, first movethe control button m/M to select (OSD H POSITION)

for horizontal adjustment, or (OSD V POSITION) for vertical adjustment. Then move the control button </, to shift the on-screen menu.

Locking the controlsTo protect adjustment data by locking the controls, first

move the control button m/M to select (CONTROL LOCK). Then move the control button ,, to select ON.

Only the 1(power) switch, EXIT, and (CONTROL LOCK)of the OPTION menu will operate. If any other items areselected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to OFF.

13