Resetting the adjustments (RESET)

This monitor has the following 2 reset methods.

xResetting all the adjustment data for the current input signal

1Press the MENU button.

The menu appears on the screen.

2Move the control button up or down to highlight 0 RESET and press the control button.

3Move the control button up or down to select 01 and press the control button.
4Move the control button up or down to select OK and press the control button.

RESET

 

1

 

 

2

CURRENT

 

 

MODE

 

 

OK

 

 

CANCEL

 

 

 

 

 

 

Technical Features

Preset and user modes

When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the monitor’s memory to provide a high quality picture at the center of the screen. (See Appendix for a list of the factory preset modes.) For input signals that do not match one of the factory preset modes, the digital Multiscan technology of this monitor ensures that a clear picture appears on the screen for any timing in the monitor’s frequency range (horizontal: 30 – 130 kHz, vertical: 48 – 170 Hz). If the picture is adjusted, the adjustment data is stored as a user mode and automatically recalled whenever the same input signal is received.

Note for Windows users

For Windows users, check your graphics board manual or the utility program which comes with your graphics board and select the highest available refresh rate to maximize monitor performance.

EX I T : MENU

Note that the following items are not reset by this method:

• on-screen menu language (page 8)

•

color mode setting in the OPTION menu (EASY, PRESET,

 

EXPERT, sRGB) (page 14)

•

color temperature setting in the PRESET mode (5000K,

 

6500K, 9300K) (page 15)

Power saving function

This monitor meets the power-saving guidelines set by VESA, ENERGY STAR, and NUTEK. If no signal is input to the monitor from your computer, the monitor will automatically reduce power consumption as shown below.

US

• on-screen menu position (page 16)

xResetting all of the adjustment data for all
input signals
Select 02 in step 3 above.

Note

The RESET function does not function when (CONTROL LOCK) is set to ON.

Power mode
Power consumption
! (power)

 

 

indicator

 

 

 

normal

≤ 135 W

green

operation

 

 

 

 

 

active off*

≤ 3 W

orange

(deep sleep)**

 

 

 

 

 

power off

Approx. 0 W

off

 

 

 

*When your computer enters power saving mode, the input signal is cut and NO SIGNAL appears on the screen before the monitor enters active off mode. After a few seconds, the monitor enters power saving mode.

**“Deep sleep” is power saving mode defined by the Environmental Protection Agency.

17