Restoring the color from the EASY, PRESET, or sRGB modes (IMAGE RESTORATION)

The colors of most display monitors tend to gradually change brilliance over several years of service. The IMAGE RESTORATION feature found in the EASY, PRESET, and sRGB menus allows you to restore the color to the original factory quality levels. The explanation below explains how to restore the monitor’s color from the EASY mode for example.

First, select the EASY, PRESET, or sRGB mode in the OPTION menu (page 14).

1Press the MENU button.

The menu appears on the screen.

2Move the control button up or down to highlight

COLOR and press the control button.

The COLOR menu appears on the screen.

3Move the control button up or down to highlight IMAGE RESTORATION. Then press the control button.

4Move the control button up or down to select OK. Then press the control button.

COLOR

I MAGE

RESTORAT I ON

OK

CANCEL

EX I T : MENU

The picture disappears while the color is being restored (about 2 seconds). After the color is restored, the picture reappears on the screen again.

Notes

•Before using this feature, the monitor must be in normal operation mode (green power indicator on) for at least 30 minutes. If the monitor goes into power saving mode, you must return the monitor to normal operation mode and wait for 30 minutes for the monitor to be ready. You may need to adjust your computer’s power saving settings to keep the monitor in normal operation mode for the full 30 minutes. If the monitor is not ready, the following message will appear.

COLOR

I MAGE

RESTORAT I ON

AVA I LABLE

AFTER

WARM UP

EX I T : MENU

•The monitor may gradually lose its ability to perform this function due to the natural aging of the picture tube.

Additional settings (OPTION)

You can lock the controls, change the on-screen language, change the menu position, and set the COLOR mode.

1Press the MENU button.

The menu appears on the screen.

2Move the control button up or down to highlight

OPTION and press the control button.

The OPTION menu appears on the screen.

3Move the control button up or down to select the desired adjustment item.

Adjust the selected item according to the following instructions.

xLocking the controls (CONTROL LOCK)

You can protect the adjustment data by locking the controls. Move the control button up or down to

highlight (CONTROL LOCK) and press the control button. Then move the control button up or down to select ON and press the control button.

Only the ! (power) switch, MENU button, INPUT switch, and

(CONTROL LOCK) of the OPTION menu will operate.

If any other items are selected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to OFF.

xChanging the on-screen language (LANGUAGE)

See page 8.

xChanging the menu’s position

(OSD POSITION)

Change the menu’s position if it is blocking an image on the screen.

Move the control button up or down to select (OSD

POSITION) for horizontal adjustment, or (OSD POSITION) for vertical adjustment and press the control button. Then move the control button up or down to shift the on-screen menu.

xSetting the COLOR mode

See page 14.

16