Adjusting the brightness and contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the currently selected input connector.
1Press the MENU button.
The menu appears on the screen.
2Move the control button up or down to highlight 
. Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
3Move the control button up or down to highlight 6 or 
. Then press the control button.
4Move the control button up or down to adjust the contrast (6) or brightness (
). Then press the control button.
If you selected the sRGB mode in the COLOR MODE ( 
) of the OPTION (
) menu, the following CONTRAST/BRIGHT menu appears on the screen.
CONTRAST / BR I GHT
s RGB
: 
/ 
EX I T : MENU
You cannot adjust the contrast (6) or brightness (
) on this screen. If you want to adjust them, select a mode other than sRGB in the COLOR MODE ( 
) of the OPTION (
) menu.
For more information about using the sRGB mode, see “Adjusting the color of the picture (COLOR)” on page 14.
Adjusting the centering of the picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1Press the MENU button.
The menu appears on the screen.
2Move the control button up or down to highlight 
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3Move the control button up or down to select
forhorizontal adjustment, or 
for vertical adjustment. Then press the control button.
Adjusting the size of the picture |
| |
(SIZE/CENTER) |
| |
This setting is stored in memory for the current input signal. |
| |
| 1 Press the MENU button. | US | |
The menu appears on the screen. | ||
|
2Move the control button up or down to highlight 
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3Move the control button up or down to select 
for
horizontal adjustment, or 
for vertical adjustment. Then press the control button.
11