Sony CV-P12PX E-16, Install Window Panel, Installation in a sliding sash window, CV-PD13PX

INSTALL WINDOW PANEL

Installation in a sliding sash window

(CV-PD13PX)

1 Cut the foam seal A to the proper length and attach it to the window frame.

2 Attach 2 window exhaust adapters to the window panel inside opening.

3 Attach 2 protective screens to the outside of the window exhaust adapter.

Use 4 screws to attach the protective screens onto the outside of the window exhaust adapter.

4 Install 2 rain deflectors to the outside of the window panel.

Line up the holes on the rain deflec- tor and the window panel. Use 8 bolts, 8 washers, 8 split-ring washers and 8 nuts to attach the rain deflector onto the window panel.

5 Install the window panel into the window frame.

If the inner height of the window is less than 28" (718mm) high.

(1)Remove the adjustment panel from the window panel, and cut the window pan- el to the same height as the window.

(2)Open the window sash and place the window panel on the window frame.

(3)Secure the window panel to the window frame with 2 large wood screws.

Foam seal A

Window panel

Window exhaust adapter

Cut

Window panel

Window panel

E-16