INSTALL WINDOW PANEL
Installation in a double-hung sash window
(CV-P12PX, CV-P13PX)
1 Cut the foam seal A to the proper length and attach it to the window stool.
2 Attach the window exhaust adapter to the window panel inside opening.
3 Attach the protective screen to the outside of the window exhaust adapter.
Use 2 screws to attach the protective screen onto the outside of the window exhaust adapter.
4 Install the rain deflector to the outside of the window panel.
Line up the holes on the rain deflector and the window panel. Use 4 bolts, 4 washers, 4
5 Attach the window panel to the window stool.
If the inner width of the window is less than 28" (718mm) wide.
(1)Remove the adjustment panel from the window panel, and cut the window panel to the same width as the window.
(2)Open the window sash and place the window panel on the window stool
(3)Secure the window panel to the window stool with 2 large wood screws.
Foam seal A
Window panel
Window exhaust adapter
Inside
Cut
Window panel
Window panel |
Window stool