Sony CV-P12PX Maintenance, Cleaning The Filter, Cleaning The Unit And The Remote Control, E-31

Models: CV-P12PX

1 34
Download 34 pages 22.02 Kb
Page 33
Image 33
MAINTENANCE
Perform drainage to drain out water within the unit.

MAINTENANCE

Be sure to disconnect the power from the wall socket before performing any mainte- nance.

CLEANING THE FILTER

If the filter is clogged with dust, the airflow will be reduced, resulting in poor cooling performance. The filter should be cleaned every two weeks.

AIR FILTER

1 REMOVE THE FILTER

Gently pull the filter handle to the right and slide the filter out of the unit.

Air filter

2

CLEAN THE FILTER

 

• Use a vacuum cleaner to remove any dust. If

 

 

the filter is very dirty, wash it with detergent

 

Air inlet filter

and rinse carefully with clean water. Dry the

 

filter in the shade before reinstalling them.

 

3

REINSTALL THE FILTER

 

• Hold the filter handle and gently push the filter

 

 

back into place.

 

 

Never operate the unit without the filter. Doing

 

 

so may result in serious damage to the unit.

Grille

AIR INLET FILTER (For single-duct type)

 

 

 

Remove the grille and clean the air inlet filter

 

 

with a vacuum cleaner.

ENGLISH

CLEANING THE UNIT AND THE REMOTE CONTROL

Wipe them with a soft, dry cloth or with a cloth moistened with a mild soap. Carefully remove any residue by wiping with a damp cloth and dry completely.

Avoid splashing water onto the unit. Water can dangerously damage the electrical insulation. Never use harsh chemicals or abrasive cleaners on any part of the unit. To avoid damaging the unit, do not use hot water (120°F/50°C or hotter) when cleaning.

MAINTENANCE AFTER AIR CONDITIONER SEASON

1

2 Operate the unit in the FAN or VENTILATION mode for about half a day to thoroughly dry inside the unit.

3 Clean the filters, then reinstall them.

E-31

Page 33
Image 33
Sony CV-P12PX Maintenance, Cleaning The Filter, Cleaning The Unit And The Remote Control, E-31, Air Filter, English