BConnecting to a power source

You can use the following power sources:

•LR6 (size AA) alkaline batteries

•AC power adaptor

For the battery life, see “Specifications.”

Using the dry batteries

Note

Be sure to remove the AC power adaptor when using the dry batteries.

1 Open the battery compartment lid.(rear)
To remove the dry batteries

Remove the batteries as illustrated below.

When to replace the batteries

You can check the remaining power of the batteries in the display.

Battery power is full.

r r

Battery power is getting low.

r

r

2 Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment.

Insert the # end first (for both batteries).

Battery power is low.

r

Lo batt* Batteries are depleted.

* Beep sounds.

When the batteries are depleted, replace both batteries with new ones.

Notes

• The indicator sections of roughly shows the remaining battery power. One section does not always indicate one-fourth of the battery power.

• Depending on operating conditions, the indicator

sections of

may increase or decrease.

(Continued)

to Connectingpower a source

23