Symptom | Cause and/or corrective actions |
CHARGE lamp flashes on | c The buttons are locked. Slide the HOLD switch back. |
the CD player when you |
|
press a button, and the |
|
CD does not play. |
|
|
|
Cannot adjust the volume | c The CD player is connected to an audio device. Adjust the volume using |
with the VOL +/– buttons | the volume control on the connected device. |
on the CD player. |
|
|
|
During recording with | c Record the track number again using a MiniDisc recorder, DAT |
optical digital | recorder, etc. |
connection, the track | c See the instruction manual that comes with the recording device. |
number cannot be |
|
recorded correctly. |
|
The CD player does not start charging.
cDuring stop, press x/CHARGE.
cYou pressed xon the remote control. Press x/CHARGE on the CD player.
Playback starts from the point you stopped. (resume function)
cThe resume function is working. To start playing from the first track, turn the rotary control on the remote control toward N/> and hold it until the first track starts playing (press >Nfor 2 seconds or more for the CD player), or open the lid of the CD player. Or, remove all power sources, then insert the batteries or connect the AC power adaptor again.
Rustling noise is heard c Close the lid of the battery compartment firmly. from the CD.
When closing the lid of the CD player, the CD starts to rotate.
cThe CD player is reading the information on the CD. It is not malfunctioning.
You cannot operate the c The buttons on the CD player are kept pressed by mistake.
CD player properly using the remote control.
36