Troubleshooting

Symptom

Cause and/or corrective action

The CD does not play or

c The CD is dirty or defective.

“No disc” appears in the

c

Check that the CD is inserted with the label side up. (page 15)

display when a CD is placed

c Moisture condensation has occurred.

in the CD player.

 

Leave the CD player aside for several hours until the moisture

 

 

evaporates.

 

c Close the lid of the battery compartment firmly. (page 33)

 

c Make sure the battery is inserted correctly. (pages 33, 35)

 

c Connect the AC power adaptor to an AC outlet securely. (page 15)

 

c Press the jog lever (CD player: Push the 5-way control key toward

 

 

u) after one second or more has passed since the AC power

 

 

adaptor was connected.

 

c The CD-R/RW is blank.

 

c There is a problem with the quality of the CD-R/RW, recording

 

 

device, or application software.

OPERATION lamp flashes on

c

The buttons are locked. Slide the HOLD switch back. (page 28)

the CD player when you press

 

 

a button, and the CD does not

 

 

play.

 

 

Cannot adjust the volume.

c AUDIO OUT is set to “LINE.” Adjust the volume using the

 

 

volume control on the connected device. (page 31)

 

c Set AUDIO OUT to “HP.” Adjust the volume using VOL +/– on

 

 

the CD player. (page 31)

During recording with optical

c Record the track number again using a MiniDisc recorder, DAT

digital connection, the track

 

recorder, etc. (page 31)

number cannot be recorded

c See the instruction manual that comes with the recording device.

correctly.

 

(page 31)

The rechargeable battery

c The rechargeable battery is not inserted in the battery

cannot be charged.

 

compartment.

 

c The terminals of the charging stand are dirty. Wipe them with a

 

 

soft, dry cloth. (page 38)

 

c The CD is playing. Turn it off.

 

c The CD player is not placed correctly on the charging stand. Place

 

 

the player on the stand securely and make sure that the

 

 

OPERATION lamp lights up. (page 34)

Playback starts from the

c The resume function is working. To start play from the first track,

point you stopped. (resume

 

press the jog lever during stop (CD player: push and hold the 5-

function)

 

way control key toward u) until the first track starts playing, or

 

 

open the lid of the CD player. Or remove all power sources, then

 

 

insert the battery or connect the AC power adaptor again.

 

 

(pages 15, 16, 33, 35)

Rustling noise is heard from

c

Close the lid of the battery compartment firmly. (page 33)

the CD.

 

 

When using with a connected stereo system, the sound is distorted or noisy.

cAUDIO OUT is set to “LINE.” Adjust the volume of the connected device. (page 31)

cAUDIO OUT is set to “HP.” Adjust the volume using VOL +/– on the CD player. (page 31)

40-GB