Preparing a Power
Source (Rechargeable Battery)
Charge the rechargeable battery before using it for the first time or when it is depleted.
To maintain the original battery capacity longer, charge the battery only when it is completely depleted (“Lo Batt” appears on the display).
Since the supplied charging stand is for this player only, you cannot charge any other model using this stand.
1Squeeze the OPEN switch from both sides to open the lid of your player.
OPEN switch
2Open the battery compartment lid inside the player.
Raise
Battery
3Insert the
Insert the end first.
4Connect the AC power adaptor to the supplied charging stand. Then insert the player into the charging stand.
The OPR lamp on the CD player flashes, then lights up. On the display of the CD player, “Charging” flashes, and the
indicator sections of (battery) light up in succession as charging progresses. When the remote is connected, “Charging” flashes and the indicator
sections of (battery) light up in succession in the remote display.
to an AC outlet
AC power adaptor
OPR lamp
Charging stand
Terminals
to DC IN 3V
When the battery is completely charged, the OPR lamp goes off and “Charging” disappears.
Continued
Started Getting
11