Symptom | Cause and/or corrective action |
The playing time is too short. The | Check that you are using an alkaline battery and not a |
CD does not play. | manganese battery. |
| Replace the dry battery with a new LR6 (size AA) alkaline |
| battery (page 13). |
| Charge and discharge the rechargeable battery several times |
| (page 11). |
Certain tracks cannot be played. | You tried to play files saved in a format that is not compatible |
| with this player (page 5). |
| Change the setting of |
| You may play your CD (page 32). |
“Lo Batt” appears on the display, | The rechargeable battery is used up completely. Charge the |
and the CD does not play. | battery (page 11). |
| Replace the dry battery with a new LR6 (size AA) alkaline |
| battery (page 13). |
“Hi DC in” appears on the display. | An AC power adaptor which is rated higher than the one |
| supplied or recommended is being used. Use only the supplied |
| AC power adaptor or the car battery cord recommended in |
| “Optional Accessories” (page 39). |
The CD does not play, or “No Disc” | The CD is dirty or defective. Clean it or change it. |
appears on the display when a CD | Check that the CD is inserted with the label side up |
is placed in the player. | (page 16). |
| |
| Moisture condensation has occurred. Leave the CD player |
| aside for several hours until the moisture evaporates. |
| Close the lid of the battery compartment firmly (page 11). |
| Make sure the battery is inserted correctly (page 11, 13). |
| Connect the AC power adaptor to an AC outlet securely |
| (page 15). |
| Press on the remote (on the player, press of the jog |
| lever) after one second or more has passed since the AC power |
| adaptor was connected. |
| The |
| There is a problem with the quality of the |
| recording device, or application software. |
|
|
The OPR lamp flashes on the | The buttons are locked. Slide the HOLD switch back |
player when you press a button, | (page 18). |
and the CD does not play. |
|
| Continued |
Information Additional
35