Preparing a Power

Source (Dry Battery)

Use only the following dry battery type for your CD player:

• LR6 (size AA) alkaline battery

1Slide the OPEN switch to open the lid of your player.

OPEN switch

2Open the battery compartment lid inside the player.

 

Raise

Battery

 

compart-

Press

ment lid

3Insert the LR6 (Size AA) battery (not supplied) by matching the to the diagram in the battery compartment.

Insert the end first.

4Closeplace. the lid until it clicks into

Press here.

To remove the dry battery

Remove the battery as illustrated below.

Checking the remaining power of the battery

The remaining power of the battery is indicated in the display as shown below. As the black indicator section decreases, the remaining power is depleted further.

   

“Low Battery” * * Beep sounds.

When the battery is depleted, replace it with a new one.

Notes

•The display shows the approximate battery power remaining. For example, one section does not always indicate one-fourth of the battery power.

•Depending on the operating conditions, the display may increase or decrease relative to the actual power remaining.

10