Boom / Head Installation
11.Routing Cylinder Hoses from Boom to Valve The Hose from the boom to the valve will be split, the four hoses to the door cylinder and swivel cylinder will run together through a section of sleeving material to the RH side of the tractor (See Figure 9). On the Right hand side of the tractor the four hoses will connect to the diverter valve in the coded locations (See Hose Codes on next pages). Tie the hoses to the frame under the tractor (See Figure 10). The two hoses from the diverter valve will continue along the LH side of tractor with sleeving material over them (See Figure 10) to the front of the tractor. They will have hose support brackets on them that bolt to the side of the tractor (See Figure 10) where they will be connected to the valve at the Door / Swivel Ports in the correct order (See Figure 13 & 14).
The other cylinder hoses from the boom will be inserted into sleeving material and also be routed under the tractor to the LH side (See Figure 11). They will continue up the LH side to the front of the tractor where they will connect to the valves ports. The hoses will be held to the frame with metal hose holders bolted to the tractor frame (See Figure 12).
NOTE: the hoses must be run through the sleeving material. On the LH side there is a hole in the center frame weldment the hoses can be run through it if wanted. Connect the hoses to the valve as shown (See Figure 11)
60 Inch Head with Swivel Hitch Mount
Figure 4
Figure 6
60 Inch Head with Swivel Hitch Mount
Figure 5
50 Inch Head w/o Swivel Hitch Mount
50 Inch Head w/o Swivel Hitch Mount
Figure 7
Motor Circuit Hoses to Boom Connections: (Listed as reference)
Color Tie | (Code) | Hose Size |
| Hyd. Function |
Red | R | SAE # 16 | Pressure Flow to Motor | |
Orange | OR | SAE # 16 | Return Flow From Motor | |
Blue | B | SAE # 8 | Case Flow From Motor to Boom | |
Blue | B | SAE # 12 | Case Flow at Boom to Tank | |
Axtreme Boom (Asy. Man) 07/06 |
|
| ||
© 2006 Alamo Group Inc. |
|
| Section 7 - 4 |
|
