Frame Installation
Frame Installation:
1.Frame Components. The frame will include the rear axle mounts, a LH & RH Frame rail. Two front frame mounts, a LH & RH. One center frame weldment. (See Figure 17, 18, 19, 20 & 21)
2.Install Frame Components. The Frame components will only fit one way. The Frame com- ponents are a Bolt together assembly no welding will be required. The Frame components will bolt together and to the tractor using mostly 3/4" and/or
20mm bolts. Each 3/4" & 20 mm bolt will use hardened flat washers, one on the head side when bolts go into the tractor castings. Two washers used when bolts use a nut and go through the frame. These hardened washers are important.
RH Rear Frame
Mount Weldment
Figure 18
LH Rear Frame
Mount Weldment
Figure 17
RH Front Frame
Mount Weldment
Figure 19
Figure 20
LH Front Frame Mount Weldment
Center Frame
Weldment
Figure 21
Axtreme Boom (Asy. | Man) 07/06 |
|
|
|
|
© 2006 Alamo Group Inc. | Section 4 - 7 |
|
