Alamo 02984405 Hose End Fitting Torque Specification, Torque Values - Bolts, Inche Sizes

SPECIFICATIONS - AXTREME BOOM

8.Hose End Fitting Torque Specification:

Hose End Type: 37 Degree Angle End Steel Hose End Fittings*

Dash	Nominal Cyl.	Torque	Torque
Size	Size (in.)	in. lbs.	ft .lbs.
-4	1/4"	140	12
-6	3/8"	230	19
-8	1/2"	450	38
-10	5/8"	650	54
-12	3/4"	900	75
-16	1"	1200	100
-20	1-1/4"	1600	133
-24	1-1/2"	2000	167
-32	2"	2800	233

*Straight Threads do not always seal better when higher torgues are used. Too much torque causes distortion and may lead to leakage. DO NOT over torque fittings and DO NOT allow any contaminants to enter system through fittings when installing them.

9.TORQUE VALUES - BOLTS:

Maximum Torque per Bolt Size and Grade, Ft lbs & (Nm)

IMPORTANT ! Listed below IS BOLT TORQUE and NOT APPLICATION TORQUE, Component Application Torque will vary dependimg on what is bolted down and the type material (Metal) that is being bolted together. Thread condition and lubrication will vary Torque settings.

Inche Sizes

Bolt	2 (B)		5 (D)			8 (F)
Dia.
inch	Plain Head		3 Dashes		6 Dashes
1/4	Not Used		10	(14)	14	(19)
5/16	Not Used		20	(27)	30	(41)
3/8	Not Used		35	(47)	50	(68)
7/16	35 (47)		55	(75)	80	(108)
1/2	55 (75)		85 (115)		120		(163)
9/16	75 (102)		130	(176)	175		(230)
5/8	105	(142)	170	(230)	240		(325)
3/4	185	(251)	300	(407)	425		(576)
7/8	160	(217)	445	(603)	685		(929)
1	250	(339)	670	(908)	1030 (1396)
1-1/8	330	(447)	910 (1234)		1460 (1979)
1-1/4	480	(651)	1250	(1695)	2060 (2793)

ALWAYS

CHECK

MARKINGS

ON

TOP

OF

BOLT

HEAD

OR

OTHER

BOLT

DESCRIP-

TIONS

Metric Sizes

Bolt
Dia.	4.8	8.8	10.8
mm
6	5	7	12
8	11	20	25
10	20	40	58
12	37	70	105
14	60	100	140
16	92	155	200
18	118	216	280
20	160	270	355
22	215	330	430
24	285	500	700
27	450	875	1000
30	600	1200	1700
33	800	1600	2300
36	900	2100	3000

Axtreme Boom - Asy Man (07/06)

© 2006 Alamo Industrial Section 2 - 6