PRE-DELIVERY INSPECTION CHECKLIST
Saftey Equipment:
-----Operators Manual is with Unit.
-----The Safety Decals are installed as listed in the Assembly Manual.
-----Valve operation plate is installed.
-----Operators cage or Tractor Cab is in place.
-----Deflectors are installed on the Mower Head.
-----Tractor Rops or Cab with seatbels installed properly.
Frame and Boom:
-----Axle Plate Bolts are torqued.
-----Boom Rest Axle Plate Bolts are torqued.
-----Front Rail Bolts are torqued .
-----Front Support Bolts at tractor are torqued.
-----Rear Rail Bolts torque .
-----Rotator bolts torque to.
-----All Welds inspected toinsure proper welds and locations.
Hydraulic System:
-----Oil Level in Hydraulic Tank is within the sight gauge.
-----Hose connections are tight.
-----Hoses do not have any kinks or twist in them.
-----Front Pump Shaft adapter bolts are tight..
-----Front Pump Shaft Coupler / Drive Shaft is lubricated and has an
-----The Pump Drive Shaft has correct alignment.
-----Suction Hose has no leaks or kinks.
Rotary Mower Head:
-----Skid Shoe Bolts are torqued to 120 ft. lbs.
-----Spindle Housing Bolts are torqued to 400 ft. lbs.
-----The Spindle Housing is properly lubricated.
-----Motor Bolts are torqued to 120 ft. lbs.
-----Blade Carrier (Bar) Bolts torque to 400 ft. lbs.
-----Blade Bolts are torqued and the retainings Pins are in place.
-----Blades Swing freely.
Boom:
-----All Hoses tightened and no leaks.
-----All hoses secured to where they will not rub, get pinched or hanging down where they may catch on something.
-----All Decals installed
-----Pump Primed and Pressure adjusted if needed (only applys to Pump for Cylinder control.
Axtreme Boom (Asy. Manl) 07/06
© 2006 Alamo Group Inc. | Section 11 - 2 |