Pump - Driveline - Hose Installation
Swivel Cyl. Base End C1 Port (G/W Tie)
From Valve "A"
Swivel Cyl. Rod
End C4 Port (G Tie)
Port to P1 Diverter
Port (G / WTie)Door Cyl. Base End C2 Port (Y/W Tie)
Valve "A" Port to P2 Diverter Port
Port (G Tie) Door Cyl. Rod End C3 Port (Y Tie)
FIGURE 19
FIGURE 20
Return Oil Cooler with Fan
Return to Tank
Return Filter
Two Wires In Plug
1 Red Wire = Pos (+) Connector
1 Black Wire = Neg
Return From Cyl
Control Valve
Figure 21
The return oil cooler with fan is in the cylinder control valve circuit. The return oil from the cylinder control valve is going through the cooler as it is being returned to the cutter control valve block. (See Figure 20 & 21).
Axtreme Boom (Asy Man) 07/06
© 2006 Alamo Industrial | Section 6 - 9 |
