Joystick Mounting
Installing Wire Harness To Valve:
(Continued)
5.Terminal Connections. The Valve is mounted on the left hand side of the hydraulic tank.
| PLUG | FUNCTION |
1 | 1 st Plug | Swing Terminal |
2 | 2 nd Plug | Lift Terminal |
3 | 3 rd Plug | Dipper Terminal |
4 | 4 th Plug | Tilt Terminal |
5 | 5 th Plug | Door Terminal |
Always check to make certain that the plugs are securly mounted t mthe valve.
6.Wire Harness Completed. Pull the Wire harness back toward Cab to remove any ex- cess slack, only enough to remove slack not to make Wire Harness tight. Tie wire harness or hoses to Tractor Frame Rails to prevent them from rubbing or getting caught on something. The Wiring Schematic is shown in this book as a reference only, the wire harness will come to you assembled and ready to mount. The only wires that will have to be altered are the wires inside that connect to the existing Tractor Wires. These inside wires are intentionally left long so they can be cut as needed. None of the wires with the factory plugs will have to be cut.
FIGURE 22
| Door Tilt | Lift Swing | |
| FIGURE 23 |
| Dipper |
|
|
|
|
|
|
|
|
Short Handle
Phillips
Screwdriver
FIGURE 24
Axtreme Boom (Asy Man) 07/06
© 2006 Alamo Industrial | Section 9 - 10 |