Frame Installation
Figure 33
Figure 34
Turret Assembly Installation:
1.Turret Assembly. Theturret assembly is shipped assembled with the hydraulic swing cyl- inders, hoses, pivot bearing assembly, boom mount weldment and mounting pins installed (See Figure 35 & 36).
2.Under Frame Weldment. The Under frame weldment center section is designed for the turret assembly to mount on the RH side. Remove the one long mounting pin and the front and back short mounting pins (See Figure 36 & 37). Check to make certain the mounting bolts mounting the center ubder frame weldment are installed with the bolt heads unter frame weldment and nuts are on top visible looking down, if they are in wrong the swing cylinders will hit the bolts causing damge to cylinders and bolts. (See Figure 37)
Figure 35
Turret Mount | Center Section |
Attaching Pin, | Under Frame |
Long Pin | Weldment |
Turret Mount
Attaching Pin,
Long Pin
Turret Attaching Pin, Short Pin, one Front side and one rear side.
NOTE: Turret Assembly shown as diassembled for illustration only, Turret will be shipped as an assembly when shipped with mount kit.
Figure 36
| Axtreme Boom (Asy. Man) 07/06 |
| |
|
|
|
|
| © 2006 Alamo Group Inc. | Section 4 - 12 |
|
