BConnecting to a power source

You can use the following power sources:

•AC power adaptor (see “Playing an audio CD or ATRAC3plus/ATRAC3/MP3 files”)

•Rechargeable batteries

•LR6 (size AA) alkaline batteries

For the battery life, see “Specifications.”

Using the batteries

Use only the following batteries for your CD player.

Rechargeable batteries (not supplied)

Charge the rechargeable batteries before using them for the first time.

• NH-WM2AA (NH-WMAA ⋅ 2)

Dry batteries

• LR6 (size AA) alkaline batteries

To insert the batteries

1 Open the battery compartment lid inside your CD player.

2 Insert two batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Insert # end first (for both batteries).

To charge the rechargeable batteries (not supplied)

1Connect the AC power adaptor to the DC IN 4.5 V jack of your CD player and an AC outlet.

2Push the 4-way control key toward

x•CHG (RADIO OFF) to start charging. The CD player charges the batteries. The

indicator sections of

light up in

 

succession and “Charging” appears in the

 

display. When the batteries are

 

completely charged, “Charging” and the

 

indicator get turned off.

 

If you push the 4-way control key toward

Connectingto

3 Disconnect the AC power adaptor.

x•CHG (RADIO OFF) after the charge

 

has already been completed, the

 

indicator flashes and “FULL” appears in

 

the display.

 

 

 

 

a

To remove the batteries

 

power

 

 

Remove the batteries as illustrated below.

source

 

 

(Continued)

33-GB