To preset stations manually

If the stations cannot be preset automatically, preset the stations manually. 1 Press FM or AM to select the band (direct power-on).

2 Press FM or AM for 2 seconds or more to enter the preset mode.

The preset number 1 will flash in the display.

3 While the preset number 1 is flashing, tune in a station you want by pressing TUNING + or –, and select a preset number by pushing the 4-way control key toward . or >.

4 To store, press DISPLAY (MEMORY) while the preset number is flashing.

If there was a station stored on this preset number, the newly preset station will replace the old one and the preset number increases by one.

5 To continue storing, repeat steps 3 and 4.

Note

If you cannot complete step 3 or 4 while the preset number is flashing in the display, repeat from step 2.

To stop storing

Press FM or AM for 2 seconds or more.

Push the 4-way control key toward x•CHG (RADIO OFF). The radio is turned off at the same time.

To play preset stations

1 Press FM or AM.

2 Push the 4-way control key toward . or > to tune in a stored station.

28-GB