IBM 560E manual 33 Part 1 of 2. Error Codes

ŸThe parallel printer ports (Parallel 1, Parallel 2, and Parallel 3) in compatibility mode.

Error Codes

POST	returns a three	or more	character code message to indicate
the	type of test that failed. Figure 2-33 lists the failure indicated with
the	associated error	code.
Error	Description
Code

101Interrupt failure.

102Timer failure.

103Timer interrupt failure.

104Protected mode failure.

105Last 8042 command not accepted.

107NMI test failure.

108Timer bus test failure.

109Low meg-chip select test.

110Planar parity.

111I/O parity.

118	Planar	parity	error	logged.
158	A supervisor		password is		set,	but	no	hard disk password is set.
159	The	hard disk password is not identical to the supervisor password.
161	Dead	battery.
163	Date	and time are		not	set;	clock	not	updated.

173CMOS CRC error.

174Configuration error.

175Bad EEPROM CRC 1.

177Bad supervisor password checksum.

178EEPROM is not functional.

179NVRAM error log full.

183Supervisor password is needed.

184Bad power-on password checksum.

185Corrupted startup boot sequence.

186Inconsistency between EEPROM and security lock latch 2.

188Bad EEPROM CRC 2.

189Too many passwords attempted.

190Critically low battery condition detected.

191XX PM initialization error.

195Configuration mismatch error found during hibernation wake-up.

196Critical error found during hibernation wake-up.

201Memory data error.

202Memory line error 00 through 15.

203Memory line error 16 through 23.

215Memory test failure on on-board memory.

221ROM to RAM remap error.

301Keyboard error.

Figure 2-33 (Part 1 of 2). Error Codes

ThinkPad 560/560E System Board 2-31