Sony DAV-BC150, DAV-BC250 26GB, The speakers will emit a test tone to adjust “LEVEL” items

xSP SETUP

If you do not connect center or surround speakers, or move the surround speakers, set the parameters for CENTER and SURROUND.

CENTER SP	CENTER Y: Select this if you use a
(center	center speaker.
speaker)	CENTER N: Select this if no center
	speaker is used.
SURR SP	SURR Y: Select this if you use
(surround	surround speakers.
speaker)	SURR N: Select this if no surround
	speaker is used.
F DIST	Front speaker distance from the
(front	listening position can be set in
distance)	0.2 metre (1 ft) increments from
F D 3.0 M
	1.0 to 7.0 metres (3 to 23 ft).
F D 10F*
CEN DIST	Center speaker distance can be set up
(center	to 1.6 metres (5 ft) forward closer to
distance)	the listening position, in 0.2 metre
C D 3.0 M
	(1 ft) increments.
C D 10F*
SURR DIST	Surround speaker distance can be set
(surround	up to 4.6 metres (15 ft) closer to your
distance)	listening position from the front
S D 3.0 M
	speaker position, in 0.2 metre (1 ft)
S D 10F*
	increments.

* Only for North American models.

Notes

•In SP SETUP, the North American model’s OSD displays both metric and imperial measurements. The other model displays metric measurements only. The manual shows both.

•When you set the distance, the sound cuts off for a moment.

•If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•Do not place the surround speakers farther away from your listening position than the front speakers.

•Depending on the settings of other speakers, the subwoofer may output excessive sound.

xLEVEL

The speakers will emit a test tone to adjust “LEVEL” items.

T.TONE T.TONE OFF: The test tone is not

(test tone) emitted from the speakers. T.TONE ON: The test tone is emitted from both left and right speakers simultaneously while adjusting balance. When you select one of the “LEVEL” items, the test tone is emitted from each speaker in sequence.

You can vary the balance of the left and right speakers as follows. Be sure to set “T.TONE” to “T.TONE ON” for easy adjustment.

F BALANCE	Adjusts the balance between the
(front	front left and right speakers. (You
balance)	can adjust from the center 6 steps left
F BAL 0
	(F BAL L6) or right (F BAL R6).)

You can vary the level of each speaker as follows. Be sure to set “T.TONE” to “T.TONE ON” for easy adjustment.

CEN LEVEL	Adjusts the level of the center
(center level)	speaker (–6 dB to +6 dB, 1 dB
	increments).
SL LEVEL	Adjusts the left level of the surround
(surround left	speakers (–6 dB to +6 dB, 1 dB
level)	increments).
SR LEVEL	Adjusts the right level of the
(surround	surround speakers (–6 dB to +6 dB,
right level)	1 dB increments).
SW LEVEL	Adjusts the level of subwoofer
(subwoofer	(–6 dB to +6 dB, 1 dB increments).
level)

26GB