To use a digital satellite receiver or other components with a high audio output level

Connect the satellite receiver to the VIDEO/ SAT jacks of this system. You can also connect the components with a high audio output level (including 2V r.m.s components, such as MD, etc.) to the VIDEO/SAT jacks, and perform the following to prevent distortion occurring.

FUNCTION

1 2 3

4 5 6

7 8 9

10 0

AMP MENU

C/X/x/c ENTER

6 Press ENTER or AMP MENU.Turns off the AMP menu.The function name in the front panel display changes to “SAT.”

Tip

To return to the VIDEO function, select “ATT OFF” at step 5.
1 Press FUNCTION repeatedly until VIDEO appears in the front panel display.

2

3

Press AMP MENU.

Press X or x until “CUSTOMIZE” appears in the front panel display, then press ENTER or c.

The system enters the Customize Menu mode.

4 Press X or x repeatedly to select “ATTENUATE” in the front panel display, then press ENTER or c.

5 Press X or x to select “ATT ON” in the front panel display.The output level is changed.When you select “ATT OFF” and press x, this operation will be cancelled.
58GB