Narrows the DYNAMIC range of the sound track.Useful for watching movies at low volume late at night.

AUDIO DRC DRC OFF: No compression of DYNAMIC range.

DRC STD: Reproduces the sound track with the kind of DYNAMIC range that the recording engineer intended.

DRC MAX: Fully narrows the

DYNAMIC range.

Note

DYNAMIC range compression only applies to Dolby Digital sources.

Adjusting the speaker balance and level by using the test tone1 Press AMP MENU.

2 Press X/x until “LEVEL” appears in the front panel display, then press ENTER or c.

The system enters the Level Menu mode.

3 Press X/x repeatedly to select “T.TONE” in the front panel display, then ENTER or c.

4 Press X or x to select “T.TONE ON” in the front panel display.You will hear the test tone from each speaker in sequence.When you select “T.TONE OFF,” this operation will be cancelled.5 Press C to return “T.TONE”.6 Press X/x to select the item you want to set, then press ENTER or c.7 Press X/x to adjust the speaker setting value.

Press C to return step 6 and follow steps 6 and 7 to adjust other speaker setting values.

8 Set “T.TONE” to “T. TONE OFF” to cancel the test tone function.Test tone sound stops emitting.
9 Press AMP MENU when you have finished making adjustments.

Note

When you adjust the speaker settings, the sound cuts off for a moment.

Started Getting

27GB