Other Operations

Controlling the TV with the Supplied Remote

You can control your TV (SONY only) with the supplied remote.Controlling TVs with the remote

TV ?/1

TV

1

2

3

Number

4

5

6

 

 

 

buttons

7

8

9

10 0 ENTER

Using the number buttons for controlling the TV

When you set the remote to the TV mode, you can use the number buttons for controlling the TV.

Press the TV button.

The TV button turns red and the remote is set to the TV mode. You can select the TV channels by using the number buttons.

>10 is for selecting a channel number greater than 10.To cancel the TV mode, press the TV button again.

Notes

The TV button turns off when you do not operate the remote for 10 seconds.

Depending on the TV, you may not be able to control your TV or to use some of the buttons above.

Tip

Depending on the TV manufacturer, the following method also works. Press >10, then the number. (For example, for channel 25, press >10, then 2 and 5.)

Operations Other

 

TV/VIDEO

TV VOL –/+

TV CH +/–

Controlling the TVYou can control your TV using the buttons below.

By pressing

You can

TV [/1Turn the TV on or off.

 

 

TV/VIDEO

Switch the TV’s input source

 

between the TV and other input

 

sources.

 

 

TV VOL +/–Adjust the TV volume.

 

 

TV CH +/–Select the TV channel.

 

 

Changing the type of signal output

This will change the type of signal output from the COMPONENT VIDEO OUT jacks on the system. See page 73 for more information about the different signal types.

PROGRESSIVE

FUNCTION

1 2 3

4 5 6

7 8 9

10 0

1 Press FUNCTION repeatedly to select “DVD.”

continued

55GB