AUDIO IN

Y

PB/CB PR/CR

S VIDEO (DVD ONLY)

 

 

 

 

R

L

 

 

 

 

 

 

VIDEO/SAT

COMPONENT VIDEO OUT

 

 

 

FRONT R

CENTER

FRONT L

 

 

VIDEO

AM

COAXIAL

 

 

 

 

 

MONITOR OUT

FM 75

 

 

 

 

 

 

 

SURR R

WOOFER

SURR L

 

 

 

 

 

SPEAKER

OUT

IN

IN

IN

OUTPUT

COMPONENT

INPUT

INPUT

AUDIO

VIDEO IN

OUT

Y

S VIDEO

VIDEO

 

IN

IN

L

 

 

 

 

PB/CB

 

 

R

 

 

 

 

PR/CR

 

 

VCR or Digital

TV with COMPONENT

TV with S VIDEO jack

TV

satellite receiver

VIDEO IN jacks

 

 

Notes

Make connections securely to prevent unwanted noise.

Refer to the instructions supplied with the TV.

The system cannot output an audio signal to the connected TV. Only the audio signal of the TV is output from the system speakers.

Setup for the system (for Asian, Australian, and Saudi Arabian models)Setup is necessary for the system, depending on the TV to be connected.The factory setting for Australian and Saudi Arabian models are PAL.The factory setting for Asian models is NTSC.If the colour system of the TV is NTSC*

To set the system to NTSC, turn on the system by pressing "/1 while pressing the X button on the system. You need to hold the X button until “HELLO” appears on the display. To reset to PAL, turn off the system and then turn on again using the remote while press and hold the X button on the system, and turn the system off and then on again.

* If the colour system of the TV is PAL, do the same operation above to set the system to PAL.

When connecting to a standard 4:3 screen TVDepending on the disc, the image may not fit your TV screen.If you want to change the aspect ratio, please refer to page 65.

Started Getting

continued

21GB