The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track.

•Make sure the sound field function is on (page 48).•Check the speaker connections and settings (pages 24, 25).

•Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.

The sound comes from the center speaker only.•Depending on the disc, the sound may come from the center speaker only.No sound is heard from the center speaker.•Check the speaker connections and settings.

•Make sure the sound field function is on (page 48).

•Depending on the source, the effect of the surround speakers may be less noticeable.

No sound or only a very low-level sound is heard from the surround speakers.

•Check the speaker connections and settings.

•Make sure the sound field function is on (page 48).

•Depending on the source, the effect of the surround speakers may be less noticeable.

Operation

Radio stations cannot be tuned in.

•Check that the antenna is connected securely. Adjust the antenna or connect an external antenna if necessary.

•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.

•No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 59).

•Press DISPLAY so that the frequency appears in the front panel display.The remote does not function.•There are obstacles between the remote and the system.•The distance between the remote and the system is too far.•The remote is not pointed at the remote sensor on the system.•The batteries in the remote are weak.
The disc does not play.•There is no disc inserted.•The disc is upside down.Insert the disc with the playback side facing down on the disc tray.•The disc is skewed on the disc tray.•The system cannot play CD-ROMs, etc. (page 8).•The region code on the DVD does not match the system.

•Moisture has condensed inside the system. Remove the disc and leave the system turned on for about half an hour (page 3).

The MP3 audio track cannot be played.

•The DATA CD is not recorded in an MP3 format that conforms to ISO9660 Level 1/ Level 2 or Joliet.

•The MP3 audio track does not have the extension “.MP3.”•The data is not formatted in MP3 even though it has the extension “.MP3.”•The system can only play MP3 (MPEG1 Audio Layer3) audio.

•Remove the disc and select [CUSTOM SETUP] from the setup items. Then select [DATA CD PRIORITY] and set to [MP3] again.

•The album contains more than 250 MP3 audio tracks.•Directory level is more than 8.The title of the MP3 audio album or track is not correctly displayed.

•The system can only display alphabetical letters and numbers. Other characters are displayed as “ ”.

The JPEG image file cannot be played.

•The DATA CD is not recorded in a JPEG format that conforms to ISO9660 Level 1/Level 2 or Joliet.

•The JPEG image file does not have the extension “.JPG” or “.JPEG.”

•The data is not formatted in JPEG even though it has the extension “.JPG” or “JPEG.”

•Image length or width is more than 4720 dots.

•A JEPG image file with a high width to length ratio cannot be displayed.

•Remove the disc and select [CUSTOM SETUP] from the setup items. Then select [DATA CD PRIORITY] and set to [JPEG] again.

•Directory level is more than 8.

•The album contains more than 250 JPEG image files.•You cannot play the Progressive JPEG files.The title of the JPEG album or file is not correctly displayed.

•The system can only display alphabetical letters and numbers. Other characters are displayed as “ ”.

68GB