Step 3: TV and Video Component Hookups

Required cords

Video cord for connecting a TV monitor

YellowYellow

Audio/video cords (not supplied)

When connecting a cord, be sure to match the colour-coded pins to the appropriate jacks on the components.

Yellow (Video)

Yellow (Video)

White (L/audio)

White (L/audio)

Red (R/audio)

Red (R/audio)

Jacks for connecting video components

Connect a

To the

TV monitor

MONITOR OUT jack

 

 

VCR

VIDEO 1 jacks

 

 

Digital satellite receiver

VIDEO 2 jacks

 

 

zWhen using the S-video jack instead of the video jacks

Your TV monitor must also be connected via an S-video jack. S-video signals are on a separate bus from the video signals and will not be output through the video jacks.

zWhen you are connecting the monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, PB, PR)

Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate colour reproduction and high quality images.

Notes

•When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.

•When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH STEREO mode, the line outputs may not function properly.

continued

Started Getting

23