| V I D E O O U T VIDEO IN | VIDEO IN |
|
|
|
|
|
|
|
|
|
|
|
|
| S V I D E O |
|
| |
AM A U D I O OUT AUDIO IN | AUDIO IN |
|
|
| (DVD ONLY) |
|
| ||
|
|
|
|
|
|
| |||
| L | L O P T I C A L | DIGITAL |
|
|
| Y | P B / B - Y P R / R - Y | |
COAXIAL |
| DIGITAL | (CD ONLY) |
| VIDEO |
|
| ||
| R IN | DIGITAL | MONITOR OUT | COMPONENT VIDEO OUT | |||||
| R |
| OUT |
| |||||
FM | FRONT | R | CENTER | FRONT | L |
|
| ||
75Ω | VIDEO 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| REAR | R | WOOFER | REAR | L |
|
| |
|
|
| S P E A K E R |
|
|
|
| ||
IN | OUT | OUT | OUT | IN | IN |
|
|
|
| INPUT | COMPOMENT |
VIDEO | VIDEO | VIDEO |
| VIDEO IN | |
IN | OUT | OUT |
| VIDEO | Y |
|
|
|
| IN | |
AUDIO | AUDIO | AUDIO |
|
| P B / B - Y |
IN | OUT | OUT |
|
| |
| L | L | OUTPUT |
|
|
|
|
|
|
| P R / R - Y |
| R | R |
|
|
|
|
|
| OPTICAL |
|
|
| VCR | Digital satellite receiver | TV monitor | Equipment with component | |
|
|
|
|
| video input jacks |
If you connect a digital satellite receiver with the OPTICAL jack
The digital satellite receiver can be connected to the OPTICAL jack instead of the VIDEO IN and AUDIO IN L/R jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without the OPTICAL jack
Connect the digital satellite receiver to the VIDEO IN and AUDIO IN L/R jacks only of the system.
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV monitor to be connected. The initial setting for Asian models is NTSC but Australian models is PAL.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing 1 (power) on the remote while pressing X(pause) button on the system. You need to hold the Xbutton until
*If the colour system of the TV is NTSC, do the same operation above to set the system to NTSC.
Connecting the AC Power Cord (mains lead)
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the speakers to the system (see page 18).
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).
24