Adjusting the speaker volume and
level
1 After you stop playback, select “SPEAKER SETUP” after pressing DVD SETUP in the Setup Display.
2 Select “TEST TONE” and set “TEST TONE” to “ON.”
You will hear the test tone from each speaker in sequence.
3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” and “LEVEL” using X/x.
The test tone is emitted from both left and right speakers simultaneously.
4 Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.
Note
When you adjust the speaker settings, the sound cuts off for a moment.
72