The sound loses stereo effect when

you play a VIDEO CD, or a CD.

,Set “AUDIO” to “STEREO” in the Control Menu display (page 47).

,Make sure you connect the system appropriately.

The surround effect is difficult to

hear when you are playing a Dolby

Digital sound track.

,Make sure the sound field function is on (page 49).

,Check the speaker connections and settings (pages 25, 69).

,Depending on the DVD, the output signal may not be the entire 5.1 channel but monaural or stereo even if the sound track is recorded in Dolby Digital format.

The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.

,Check the speaker connections and setting (pages 25, 69).

,Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.

The sound comes from the centre

speaker only.

,Depending on the disc, the sound may come from the centre speaker only.

No sound is heard from the centre

speaker.

,Make sure the sound field function is on (page 49).

,Select a sound field containing the word “cinema” or “virtual” (page 49).

No sound or only a very low-level

sound is heard from the rear

speakers.

,Make sure the sound field function is on (page 49).

,Select a sound field containing the word “cinema” or “virtual” (page 49).

Operation

The disc tray indicator is on when

there is no disc inside.

,If you pressed the 1 to turn off the system without closing the disc tray, the disc tray indicator turns on. Wait a while for it to turn off. If the indicator is still on, press Aof DISC 1-DISC 5 to close the disc tray.

Radio stations cannot be tuned in.

,Check that the antennas are connected securely. Adjust the antennas and connect an external antenna if necessary.

,The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.

,No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 30).

,Press DISPLAY so that the frequency appears in the display.

The remote does not function.

,There are obstacles between the remote and the system.

,The distance between the remote and the system is too far.

,The remote is not pointed at the remote sensor on the system.

,The batteries in the remote are weak.

The disc does not play.

,There is no disc inside.

,The disc is turned over.

Insert the disc with the playback side facing down on the disc tray.

74