VIDEO Operation Setup
Video channel set
Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD/VCR Receiver through the RF cable.
If you have used a SCART lead you will not have to tune your TV, simply select the AV channel. The AV channel is already
Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa.
1 Turn on DVD/VCR Receiver and TV.
2 Set the vacant position 52 on your TV.
3 Press @ / 1 on the remote control to enter the standby mode.
4 Press and hold CH/PRESET + or – on the DVD/VCR Receiver for more than
4 seconds.
RF 52 will appear in the DVD/VCR Receiver dis- play.
RF CHANNEL | 52 |
PSET | i |
R |
|
The following picture will be displayed on the TV screen.
If the picture is snowy, move to step 5.
If the picture is clean, press @ / 1 on the DVD/VCR Receiver to store the RF channel. The video channel is now set.
5 Press CH/PRESET + or – on the DVD/VCR Receiver to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area.
You can also set it to “OFF” if there is any interference when your TV is connected to the DVD/VCR Receiver.
Note
The RF channel will not change until step 6 has been executed.
6
7 Press @ / 1 to bring the DVD/VCR Receiver from standby to on and follow your TV manufacturers tuning instruction manual to tune a new channel to the DVD/VCR Receiver.
How to use the main menu
This DVD/VCR Receiver can easily be programmed by using the menus displayed on screen.
The menus are controlled from the Remote Control Handset.
1 | Switch on your TV set and DVD/VCR Receiver |
by pressing @ / 1. | |
2 | Press MENU (i). |
The main menu will appear on the TV screen. |
fOSD | PSET | 1 2 | SYS- | A B | Indicates current | |
| NIC | REC | ||||
REC | R | ACMS | DATE | TEM | OSD |
|
ON | 16:9 | OPR |
|
| OK i | selected icon. |
OFF | 4:3 |
|
| |||
|
|
|
REC
Timer recording setting (see pages 27).
PR SET
Manual tuning setting (see page
ACMS
ACMS (Automatic Channel Memory System) (see page 16).
TIME DATE
Date and clock setting (see page 18).
OSYSTEM
To set the Colour TV System (see page 19).
OABC OSD
To change the language setting for OSD. You can select the language from English, German, French, Italian, Spanish, Dutch, and Portuguese.
OfOSD ON/OFF
To display the operational mode of your DVD/VCR Receiver (see page 30).
O16:9/4:3
To select the aspect ratio of your TV (see page 28).
OOPR
To improve the playback picture (see page 24).
ONIC
To activate or deactivate the NICAM digital sound (see page 28).
3 Press B or b to select the desired menu.
4 Press ENTER/OK and press V or v to select.
5 Press MENU (i) to return to a TV picture. Note
The VIDEO main menu will appear incorrectly when NTSC video source is inputted to the DVD/VCR Receiver.
PREPARATION