Additional Information
If Timer record events Overlap...
Do not overlap programmes, since overlapping portions of the conflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram.
16:0017:0018:00
Case A:
Program 1
Program 2
Case B:
Program 1
Program 2 
Case C:
Program 1
Program 2 
: This potion will not be recorded.
Change (Deleting) the Timer Programme
If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again.
Simply display the timer event screen. Press V or v to select the event that you wish to delete or change. Press B to delete the event...or
Press ENTER/OK to change; then press V or v to select; Station, Date, Start and End times, PDC and LP. Press V or v to enter the correct information.
The Programme Delivery Control (PDC)
The Programme Delivery Control (PDC) adjusts the start and end times of a timer record event. This can be particularly useful with sports events which may run over into extra time. The PDC signal is transmitted by the broadcaster and this controls your video recorder’s timer.
Currently only a limited number of TV companies transmit PDC signals.
Please make sure that when recording from channels that do not broadcast PDC that you turn PDC OFF.
On Screen Display (OSD)
You may easily display the clock or tape counter and tape remaining, day, month, year, day of week, programme channel, tape speed and VIDEO function on the TV screen.
If a recording is taking place these On Screen Displays will not be recorded onto the tape.
1 Press DVD DISPLAY (CLK/CNT) to display.
Press DVD DISPLAY (CLK/CNT) repeatedly to | |||||||
2 display the tape counter. |
|
|
|
| |||
VIDEO |
|
|
|
| Programme | ||
Function/ |
|
|
|
| |||
| SP STEREO | STEREO |
| Channel | |||
Tape Speed |
| STOP | TF1 |
|
|
| |
|
| NICAM |
|
|
| ||
Day/Month/ |
|
|
|
|
| Clock/Tape | |
Year/Day of |
|
| 1. 01. 03 WED | 12:00 |
|
| Counter & |
Week |
|
|
|
|
| Tape | |
|
|
|
|
|
|
| remaining |
During playback or recording, the tape remaining is displayed with the tape counter.
3 After 3 seconds the display will clear from the TV screen, leaving only the clock or tape counter and tape remaining on the TV screen.
Press DVD DISPLAY (CLK/CNT) again to remove all displays from the TV screen.
The tape remaining will only be accurate for
The tape remaining indicator may not be accurate, since it depends on the type or condition of tape used. Also, the tape remaining indicator is not displayed just after a cassette has been inserted, or after playback or recording has begun.