Radio Operation (Continued)

Tuning into a Station Manually

1

Press TUNER FM/AM on the remote control until

the frequency band appears on the display and

TV screen.

2 Press TUNER FM/AM on the remote control to select the desired band.

3 Press TUNING (+/–) on the remote control to tune in the desired station.

For your reference

Weak FM stations

“STEREO” may flash when the weak FM stereo signal is received, select another station.

To turn off the radio

Press @ / 1 to turn the DVD/VCR Receiver off or select another function mode (DVD or VIDEO).

Tuning into a Station Automatically

Hold down TUNING (+/–)on the remote control for 1 or 2 seconds, and a station is searched for automatically.

Note

The search may not stop at a station with a very weak signal.

Muting

Press MUTING to mute your unit.

You can mute your unit in order, for example, to answer the telephone, MUTING appear in the display.

RDS Operation

This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time.

RDS Tuning

When a FM station is tuned in and it contains RDS data, the unit will automatically display the station’s call sign and the RDS indicator will light in the Display Window as well as indicators for the RDS services programme (PS) if transmitted by the station.

RDS Display

The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that appears when a station is first tuned. In normal RDS operation the display will indicate the station name. Pressing RDS on the remote control enables you to show the station name.

Note

If the RDS services programme (PS) is not being trans- mitted, the Display Window will show a PS NONE mes- sage.

40GB