You can select the type of HDMI signal output from HDMI OUT jack.
[YCBCR]: The system outputs YCBCR signals.
[RGB]: The system outputs RGB signals.
Note
•If the playback picture becomes distorted, set [YCBCR] to [RGB].
•If the HDMI OUT jack is connected to a component with a DVI jack, [RGB] signals will be automatically output even when you select [YCBCR].
x[AUDIO (HDMI)]You can select the audio output status from the HDMI OUT jack.
[OFF]: The system does not output the sound from the HDMI OUT jack.
[ON]: The system outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24 bit PCM signals to 48 kHz/16 bit PCM.
Note
•When you connect the unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], [A/V SYNC], DYNAMIC BASS, “DEC. MODE,” and sound mode are not applied to the sound that is output from the TV.
•When you set the function to other than “DVD,” the system does not output the sound from the HDMI OUT jack even if you set [AUDIO (HDMI)] to [ON].
x[JPEG RESOLUTION]You can select the resolution of JPEG image files output from the HDMI OUT jack.
[SD 
]: The system outputs standard resolution with a black frame.
[HD 
]: The system outputs HD resolution with a black frame.
[HD]: The system outputs the HD resolution without a black frame.
[(1920 × 1080i) HD 
]: The system outputs full size HD resolution with a black frame. [(1920 × 1080i) HD]: The system outputs full size HD resolution without a black frame.
Note
•[JPEG RESOLUTION] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP] to other than [720 × 480p] or [720 × 576p].
• You can select [(1920 × 1080i) HD | ] or [(1920 × | |
1080i) HD] only when you set [HDMI | ||
RESOLUTION] in [HDMI SETUP] to [1920 × | ||
1080i]. |
|
|
• If you select [(1920 × 1080i) HD | ] or [(1920 × |
|
1080i) HD], next image appears after black flame. |
| |
• HDMI signal will stop momentarily when: | Disc | |
|
| |
– The system is loading or unloading a DATA CD or DATA DVD disc.
– You connect or remove a USB device.
Settings for the audio
[AUDIO SETUP]AUDIO SETUP
SPEAKER FORMATION: |
|
AUTO CALIBRATION: |
|
AUDIO DRC: | OFF |
TRACK SELECTION: | OFF |
You can select the position of the speakers for the better surround sound. For details, see “Getting Optimal Surround Sound for a Room” (page 71).
x[AUTO CALIBRATION]You can calibrate the appropriate settings automatically. For details, see “Calibrating the Appropriate Settings Automatically” (page 72).
x[AUDIO DRC] (DVD VIDEO only)You can compress the dynamic range of the sound track. [AUDIO DRC] is useful for watching movies at low volume late at night.
[OFF]: No compression of dynamic range.
[STANDARD]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended.
[MAX]: The system compresses dynamic range fully.