face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. Be quiet during the measurement.

AUDIO IN / MIC 1 /

A.CAL MIC

Calibration mic

5 Press X/x to select [YES], then press

.

Calibration starts.

Measuring. Please wait a moment.

Note

Avoid being in the measurement area and making noise during the measurement (about three minutes), to avoid measurement failure. During the measurement, test signals are output from the speakers.

The environment of the room in which the system is installed may affect measurements.

If an error message appears, follow the message, then select [YES].

An error message appears when:

the calibration mic is not connected.

front speakers are not correctly connected.

surround speakers are not correctly connected.

front and surround speakers are not correctly connected.

there is excessive noise around the calibration mic.

the calibration mic is overloaded.

6 Press C/X/x/c to select [YES] or [NO], then press.xThe measurement is OK.Disconnect the calibration mic, then select [YES]. The result is implemented.

Measurement complete.

FRONT L :

YES

FRONT R :

YES

CENTER :

NONE

SUBWOOFER :

YES

SURROUND L :

NONE

SURROUND R : NONE

If OK, unplug calibration mic and select

“YES”.

YES

NO

 

xThe measurement is not OK.Follow the message, then select [YES] to retry.

Measurement failure.

Check speaker connection.

Retry?

YES

NO

Tip

You can check the distance between the listening position and each speaker. See page 81.

Note

While the Auto Calibration function works:

do not turn off the power.

do not press any button.

do not change the volume.

do not change the function.

do not change the disc.

continued

Adjustments and Settings Advanced

75GB