Step 4: Performing the Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the system.

"/1

C/X/x/c,

DISPLAY

1 Turn on the TV.2 Press [/1.

Note

Make sure that the function is set to “DVD” (page 30).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 21) and perform again.

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language.The system displays the menu and subtitles in the selected language.6 Press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

 

SCREEN SETUP

 

 

 

TV TYPE:

16:9

 

 

YCBCR/RGB (HDMI):

16:9

 

 

SCREEN SAVER:

4:3 LETTER BOX

 

 

BACKGROUND:

4:3 PAN SCAN

 

 

4:3 OUTPUT:

FULL

 

 

 

 

 

 

 

 

7 Press X/x to select the setting that matches your TV type.xIf you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode[16:9] (page 78)xIf you have a 4:3 standard TV[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 78)8 Press .The Setup Display for selecting the speaker formation appears.

9 Press C/c to select the speaker formation image as the speakers are actually positioned.

For details, see “Getting Optimal Surround Sound for a Room” (page 72).

SPEAKER FORMATION

STANDARD

continued

– BASIC – Started Getting

19GB