The system does not work normally.

•Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.

The unit does not work and “CHILD LOCK” appears in the front panel display when you press any button on the unit.

• Set the child lock function to off (page 68).

The HDMI CONTROL function does not work.

• When “HDMI” does not light up in the front panel

display, check the HDMI connection (page 24).

• Set the [HDMI CONTROL] setting in [CUSTOM

SETUP] to [ON] (page 80).

• Make sure that the connected component is

compatible with the HDMI CONTROL function.

• Check that the AC power cord (mains lead) of the

connected component is connected securely.

• Check the connected component’s setting for the

HDMI CONTROL function. See the operating

instructions of the component.

• If you change the HDMI connection, connect and

disconnect the AC power cord (mains lead), or

have a power failure, set the [HDMI CONTROL]

setting in [CUSTOM SETUP] to [OFF], then set

the [HDMI CONTROL] setting in [CUSTOM

SETUP] to [ON] (page 80).

• For details on the HDMI CONTROL function, see

the HDMI CONTROL Guide (supplied

Self-diagnosis Function

(When letters/numbers appear in the display)

When the self-diagnosis function is activated to prevent the system from malfunctioning, a 5- character service number (e.g., C 13 50) with a combination of a letter and 4 digits appears on the TV screen or front panel display. In this case, check the following table.

C:13:50

First 3

Cause and/or corrective action

characters of

 

the service

 

number

 

 

 

C 13

The disc is dirty.

 

,Clean the disc with a soft cloth

 

(page 86).

 

 

C 31

The disc is not inserted correctly.

 

,Restart the system, then re-insert

 

the disc correctly.

separately).

No sound is output from the system and TV while using the System Audio Control function.

• Set the [AUDIO (HDMI)] setting in [CUSTOM

SETUP] to [ON] (page 80).

• Make sure that the connected TV is compatible

with the System Audio Control function.

• For details on the System Audio Control function,

E XX

(xx is a number)

To prevent a malfunction, the system has performed the self- diagnosis function.

,Contact your nearest Sony dealer or local authorized Sony service facility and give the 5- character service number. Example: E 61 10

see the HDMI CONTROL Guide (supplied

separately).

When displaying the version number on the TV screen

When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.

VER.X.XX

90GB