Enjoying the Radio
Presetting Radio StationsYou can preset 20 FM stations, and 10 AM stations. Before tuning, make sure to turn down the volume to minimum.
| "/1 |
FUNCTION |
|
BAND |
|
| MEMORY |
| ENTER |
PRESET | TUNING |
x | |
|
1 Press BAND repeatedly until the band you want appears in the front panel display.
Each time you press BAND, the band toggles between AM and FM.
2 Press and hold TUNING + or – until the auto scanning starts.Scanning stops when the system tunes in a station. “TUNED” and “ST” (for stereo program) appear in the front panel display.
ST
FM | MHz |
A preset number appears in the front panel display.
ST
FM | MHz |
| ST |
FM | MHz |
|
|
5 Press ENTER.
The station is stored.
m
| ST |
FM | MHz |
|
|
Restart from step 1.
To change the AM tuning intervalThe AM tuning interval can be set to either
9 kHz (default) or 10 kHz (for some areas). To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the remote, or "/1 on the system. While holding down x (stop) (on the system), press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.