Getting Started

Step 5: Performing the Quick Setup

Follow the Steps below to make the basic adjustments for using the system.

Note

•When you connect the system and the TV with the component video cord (not supplied) or HDMI cable (not supplied), you need to set the type of video output for matching your TV. For details, see “Setting the type of video output to match your TV” (page 46).

"/1

C/X/x/c,

DISPLAY

1 Turn on the TV.2 (DAV-HDX277WC) Press [/1 on the unit.

(DAV-HDX279W/DAV-HDX576WF) Press [/1 on the unit, and POWER on the surround amplifier.

Note

•Make sure that the function is set to “DVD” (page 47).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 45) and perform again.

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language.

The system displays the menu and subtitles in the selected language.

6 Press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

VIDEO SETUP

TV TYPE:

 

16:9

PROGRESSIVE (COMPONENT

16:9

4:3 OUTPUT:

4:3 LETTER BOX

BLACK LEVEL:

4:3 PAN SCAN

BLACK LEVEL (COMPONENT OUT):

OFF

PAUSE MODE:

 

AUTO

7 Press X/x to select the setting that matches your TV type.xIf you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

[16:9] (page 69)

xIf you have a 4:3 standard TV

[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 69)

8 Press .

The Setup Display for selecting the speaker formation appears.

9 Press C/c to select the speaker formation image as the speakers are actually positioned.

For details, see “Getting Optimal Surround Sound for a Room” (page 89).

44US