Operation
Rinse Agent
A rinse agent causes water to flow off the dishes more quickly, preventing droplets that dry as spots and improving drying performance. Rinse agent come in solid and liquid forms. Your dishwasher’s rinse agent dispenser uses the liquid form.
Fill level indicator
(refill when empty)
5 | 4 | 3 | 2 |
6 |
|
| 1 |
Rinse agent
dispenser
Filling the Rinse Agent Dispenser
Drying will usually be better if you use a rinse agent. To fill the dispenser, open the cap and pour the rinse agent into the dispenser up to the knob for dosage setting. The dispenser will hold approximately four ounces of liquid rinse agent.
Adjusting the Dosage of Rinse Agent
The rinse agent dosage is set by the manufacturer and is dispensed automatically into the final rinse. If necessary, the rinse agent dosage can be adjusted by inserting a screwdriver inside the filler hole where the adjustment device is set on “4.” It is recommended that the dial be adjusted only one number at a time.
NOTE: For soft water conditions, it may be necessary to reduce the rinse agent dosage setting.
NOTE: Too much rinse agent is not advisable as this might result in the formation of foam, especially if the dishwasher is connected to a cold water supply.
Wash Temperature
Hot water dissolves and activates dishwashing detergents, dissolves grease on dishes, and helps glasses dry spot free. If the incoming water is extremely cold due to unusually cold temperatures outside, if you have recently done laundry or run hot water for showers, or if your water travels a long distance from the hot water heater to the dishwasher, the running time of the dishwasher may be longer to heat the water to the required temperature.
Checking the Wash Temperature
An incoming water temperature of 120°F (49°C) is recommended. However, the Sure Temp Water Heating System will ensure the water temperatures are correct for the cycle/options selected.
Energy Saving Tips
•Only start a wash when the machine is completely full.
•Select “ECONO WASH.”
•Do not prewash dishes. Simply scrape, load, and wash.
•Use the POTS/PANS program only for heavily soiled dishes.
•Connect the dishwasher to a cold water supply (cycle times will be longer).
Power On Light
•A blue light will illuminate from the bottom right corner of the dishwasher kickplate when a cycle is running.
Operation
26 | 27 |
