Operation

Preparing Dishes

It is not necessary to rinse normal food soils off the dishes before putting them in the dishwasher, although larger solid particles, such as bones, seeds, skins, pits, and toothpicks should be removed.

If you are not going to run the dishwasher immediately after loading, it is best to rinse salty and highly acidic foods off stainless steel, silver, and silverplate flatware. Prolonged contact of foods—including lemon juice, salt, vinegar, mustard, mayonnaise, and salad dressings—with stainless steel can cause corrosion (pitting).

Before Operation

1.Load the dishes per recommended loading. See section on Loading Dishwasher.

2.Make sure there is rinse agent in the dispenser. Add rinse agent if needed. See section on Rinse Agent.

3.Add proper amount of detergent and pre-wash. See section on Dishwasher Detergent.

4.Push both top and bottom racks in.

5.Select the desired cycle and option(s). Cycle and Option keys will illuminate to indicate selection.

6.Press “START”. The “START” symbol will illuminate to indicate the unit is ready.

7.Close the door tightly until you hear a click. Otherwise, the dishwasher will not start.

Option Restrictions

All options are not available for all cycles. Please note the following:

•The option “HI TEMP WASH” is not available in the “LIGHT/CHINA” or “ECONO WASH” cycles.

•No options are available in the “RINSE/HOLD” cycle.

•The option “TOP WASH” is available only with the “NORMAL WASH” cycle.

After selecting the wash cycle and options, depress “START” button. The start light will turn on. This merely means the machine is ready. Close the door securely within 4 seconds of pressing the “START” button.

Changing a Program

Changing a Program After the Unit has Started

The dishwasher is programmed to stop operating if the door is opened during a cycle. To change a program or option after starting the machine, open the door slightly to let the spray arms stop rotating and avoid getting sprayed with water. Press and hold “START” for four seconds to cancel the current selection, then press the touchpad(s) for your desired selection.

Press “START” again and close the door. The drain pump will run to remove any dirty water from the dishwasher before starting the newly selected cycle. Check to make sure there is still detergent in the detergent dispenser.

Opening the Door after Cycle has Started

If the door is opened after the cycle has started, the ”START” button will flash to indicate that the dishwasher is in Standby Mode. Press the “START” button and close the door securely within 4 seconds to restart the cycle.

Operation

14

15

Page 7 Page 9
Page 8
Image 8
Viking 325E, 450E manual Preparing Dishes, Changing a Program
Page 7 Page 9

325E, 450E specifications

The Viking 200, 450E, and 325E are models of rugged all-terrain vehicles celebrated for their exceptional performance and versatility in challenging environments. Designed with advanced engineering and robust components, these vehicles are ideal for forestry, agriculture, and recreation.

Starting with the Viking 200, this model excels in its balance of power and efficiency. It is equipped with a reliable four-stroke engine that offers smooth acceleration and impressive torque. The overall design emphasizes stability, featuring a low center of gravity that ensures safe maneuverability on uneven terrain. With a spacious cargo bed and a payload capacity, the Viking 200 is perfect for hauling tools, equipment, or supplies.

The Viking 450E takes versatility to a new level with its enhanced features and technologies. This model boasts an upgraded engine that not only increases horsepower but also improves fuel efficiency. Its advanced four-wheel drive system allows for seamless transitions between different types of terrain, ensuring that users can traverse mud, snow, and rocky paths with ease. The Viking 450E also features adjustable suspension systems that enhance comfort, making long drives less taxing on the operator.

On the other hand, the Viking 325E stands out due to its compact design without sacrificing performance. It is particularly appreciated in environments where space is limited, allowing it to navigate tight trails and narrow pathways effortlessly. Despite its smaller size, the Viking 325E is equipped with a high-capacity engine and durable chassis that can withstand heavy use. The model incorporates cutting-edge technologies such as electronic fuel injection for improved responsiveness and low emissions.

Each of these Viking models is designed with user comfort in mind, featuring ergonomic seating and intuitive controls that cater to operators of various experience levels. High-visibility dashboards and integrated lighting systems ensure that users can operate these vehicles safely, even in low light conditions.

Overall, the Viking 200, 450E, and 325E showcase the brand’s commitment to quality and innovation in the all-terrain vehicle market. With their impressive features, robust performance, and cutting-edge technologies, these models continue to be a preferred choice for a wide range of applications, making them indispensable tools for outdoor enthusiasts and professionals alike.
Top Page Image Contents